Using SanDisk Ultra USB 3.0 flash drive lets you transfer your files faster from one computer to another. But, when you encounter errors while using your SanDisk USB drive, it can be frustrating! Some users reported that their SanDisk Ultra USB 3.0 flash drive is not working or showing up when they try to plug it into their computer. It is not detected and won’t show as available removable storage on Windows 10 PC. If it happens to you, there are several ways you can do to fix it.
Fixing SanDisk Ultra USB 3.0 Flash Drive Not Working or Showing Up in Windows 10
There are different reasons why your SanDisk USB thumb drive is not working or not recognized hence it won’t appear on PC. It may be due to issues with a corrupted registry entry on your computer, a broken or bad USB port problem on the hardware side, or a series of corrupted files. Your SanDisk USB storage device may also not be formatted properly to the format recognizable in Windows.
NEED A NEW STORAGE DEVICE? Get your SanDisk Ultra USB 3.0 Flash Drive at Amazon Right Now!
Whatever the cause of the error on your USB flash drive, you can try each of the solutions below until you fix the problem.
Solution #1 – Update Device Drivers
- First, launch the Device Manager on your computer. You can use the Search option to enter Device Manager.
- Look for Disk drives and click the arrow to expand the menu.
- Right-Click on SanDisk USB.
- Click Update Driver.
Solution #2 – Reinstall your SanDisk Driver
- Open the Device Manager.
- Expand Disk drives option.
- Look for SanDisk USB and right-click on the filename.
- Click Uninstall Device.
- To reinstall, go back to Device Manager.
- Navigate to the Action tab on the top of the screen.
- Click Scan for hardware changes.
- It will reload and reinstall your SanDisk Driver.
Solution #3 – Restart Windows Plug and Play Services
- On the Search option, enter services.msc.
- Look for the Plug and Play services.
- Click to open it.
- Click Restart the service.
- Once done, restart your computer.
Solution #4 – Edit Power Management Settings
DON’T MISS: Western Digital Store Offers Exclusive Deals on SanDisk Flash Drives!
- Open the Control Panel.
- Go to Hardware and Sound.
- Select Device Manager.
- Expand the Universal Serial Bus option.
- Look for USB Root Hub and double-click the first entry.
- Go to the Power Management tab.
- Look for Allow this computer to turn off this device to save power.
- Uncheck the box.
- Click OK.
- Repeat the same process for all USB Root Hub entries.
Solution #5 – Format your SanDisk USB
- On the Search menu, type Windows Disk Management and press Enter.
- Look for your SanDisk USB and right-click on it.
- Click Format.
- Click OK.
What other methods do you know that will help fix the SanDisk USB error? You can share them below so that other users can benefit as well.
When I contacted SanDisk support they told me I probably had a “counterfeit” flash drive. They INSISTED I send a copy of my receipt to show where I purchased it (it was WalMart) instead of helping me fix the problem. It was NOT a counterfeit product & I will never buy this brand again. They NEVER did help me fix the problem. I bought in a multi pack & paid extra because it seemed to have higher storage & safety features. That was money down the drain! Will never buy this brand again.