When met with an error code during a Windows update, it can cause a lot of stress and hassle. Upgrading your Windows system means that you can enjoy enhanced functionalities and better features when using your Windows computer. Unfortunately, it also comes with the risk of encountering issues such as the error code 0xC1900202 – 0x20008.
Seeing such error code means that your computer falls below the minimum requirement needed to upgrade the system to Windows 11.
Troubleshooting and Fixing Windows 11 Update Error Code 0xC1900202 – 0x20008
There are possible methods that can help you resolve the error during the Windows update. Try to check each solution one at a time and see if it works out in addressing the problem.
Verify If your PC Meets the Minimum System Requirements of the Update
To upgrade your PC to Windows 11, you need to following system requirements: 1GHz or faster processor with 2 or more cores on compatible 64-bit compressor or SoC, 64 GB or larger storage, TPM version 2.0, 4GB RAM, DirecX 12 or later with WDDM 2.0 driver, UEFI system firmware Secure Boot capable and 720p display with 8 bits per color channel and greater than 9” diagonally.
If you are unsure of your system specifications, you can verify these details under System and Security in the Control Panel.
Turn On TPM and Secure Boot
On the Settings menu of your Windows PC, navigate to Update & Security. Go to Recovery and select Restart Now. Head over to Troubleshoot and click Advanced Options. Select UEFI Firmware Settings and click Restart. Enable the TPM and Secure Boot.
Expand the Reserved Partition
Before performing the following steps below, it is advisable to back up your data first to avoid unnecessary risk. You can expand the reserved partition through Windows 10 built-in Disk Management Tool.
On the Search option, type Computer Management and Run it as administrator. Go to Disk Management under Storage. Look for the drive or volume where you want to extend and right-click on it. Select Extend Volume. Click Next.
Type the amount of space in MB that you want to extend and click Next. Wait for the process to finish and hit Finish.
In Closing
Hope the methods above can help you troubleshoot the update error code on your Windows PC. If nothing works, you may need to contact Microsoft Customer Support.
