The Arlo Video Doorbell system is a safe and secure way to keep your home monitored while you’re away. It’s one of the doorbell companies that have been making waves over the past few years, and it’s not too hard to see why.
The small form factor and ease of installation are major points that put it in contention against the competition.
While the Arlo Doorbell is amazing for most owners, the quality control of these doorbells is not exactly consistent. For one, there’s the permanently flashing white light that has plagued many users.
Troubleshooting Tips for Arlo Video Doorbell Permanently Flashing White Issue
If you’re currently facing this problem on Arlo doorbell, our guide will provide the appropriate steps you can take to permanently resolve it.
Check Motion Detection LED Settings on Arlo Video Doorbell
If you find your Arlo Video Doorbell flashing white constantly, it might be due to the “breathe LED on motion detection” feature being enabled. This setting causes the LED to flash whenever motion is detected by the doorbell.
To check and modify this setting:
- Launch the Arlo app and log in to your account.
- Access the Settings for your Arlo Video Doorbell.
- Look for the option labeled “breathe LED on motion detection” or similar phrasing.
- If this option is enabled, you can toggle it off to stop the constant flashing of the LED on motion detection.
Check out awesome deals you don’t want to miss on new Arlo video doorbells on Amazon and Walmart!
Check Arlo Essential Video Doorbell Wired Settings
After setting up your Arlo Essential Video Doorbell Wired, you have the option to customize the LED behavior based on certain events. Here are the LED indications and their corresponding events:
- Slow breathing white: Indicates motion detection.
- Solid white: Indicates the doorbell is connected to a call.
- Fading white: Indicates the call from the doorbell has ended.
To check and modify these settings:
- Access your Arlo app and log in to your account.
- Navigate to the Settings for your Arlo Essential Video Doorbell.
- Look for options related to LED behavior or event notifications.
- You can customize the LED settings according to your preferences.
Check Arlo Video Doorbell Transformer
In some cases, the issue might be related to the doorbell transformer not providing sufficient power to the Arlo Video Doorbell, causing it to be unresponsive. To address this problem:
- Purchase a higher voltage doorbell transformer from a reliable source like Amazon.
- Replace the existing transformer with the new one, ensuring it provides sufficient power for the doorbell’s operation.
- After installing the new transformer, the Arlo Video Doorbell should work correctly and without any LED flashing issues.
Remember to follow the manufacturer’s instructions and safety guidelines while handling electrical components.
Troubleshoot Offline and Solid or Flashing LED Issues on Arlo Video Doorbell
- Reset the device: Perform a reset of the doorbell to see if it resolves the problem.
- Repeat the setup process: After resetting the device, go through the setup process again to ensure it is properly configured.
- Update the firmware: Check for firmware updates for your Arlo Video Doorbell and install the latest version to ensure it is running smoothly.
Issues on Arlo video doorbell can be frustrating. But, following the methods above will help you resolve these errors and get your doorbell back in good shape.
Upgrade your Arlo doorbells now and enjoy limited-time offers on Amazon and Walmart!
