Are you an avid cyclist and use Zwift for indoor training? Then you might have encountered an annoying error where the current gear on your Wattbike doesn’t get displayed properly. This can be frustrating and can disrupt your training sessions.Â
But don’t worry because this post will guide you through the steps to fix Zwift issue with current gear not displayed or gears disappeared on Wattbike error, so you can get back to focusing on your training and achieving your cycling goals.

What Causes No Gears Displayed Problem on Zwift App with Wattbike?
Zwift no gears displayed issue on Wattbike is an error that can be caused by a few different factors. One common cause is a connectivity issue between your Wattbike and the Zwift app. This could be due to a weak or unstable Bluetooth or ANT+ signal or a problem with the cables connecting your devices.
Another possible cause is an outdated version of the Zwift app or the device software on your Wattbike. Sometimes, updates to either the app or the bike’s firmware can cause compatibility issues that result in the gear display indicator not working properly.
The error could also be caused by a calibration issue with your Wattbike. If the bike is not calibrated correctly, it may not be able to accurately detect which gear you are in and relay that information to the Zwift app.
How to Fix Zwift Current Gear Not Displayed, Missing or Disappeared on Wattbike Error?
Here are some steps you can take if you’re currently encountering missing gears or gear that’s not displayed or disappeared when using an Apple TV or iPad device for your Zwift app while connecting it to Wattbike.
Check Your Bluetooth Connectivity
Ensure that your Wattbike is properly connected to the Zwift app. If you’re using Bluetooth, make sure that your Wattbike is within range of your device and that there are no other Bluetooth devices interfering with the connection. If you’re using ANT+, ensure that the dongle is properly inserted into your device and that your Wattbike is within range of the dongle.
Check Your Cables
Ensure that all cables connecting your Wattbike to the device running the Zwift app are properly plugged in and not damaged. If you’re using Bluetooth, try restarting your devices or resetting your network settings to see if that fixes the issue.
Update Zwift App and Wattbike Device Firmware
Make sure you have the latest version of the Zwift app installed on your device and that your Wattbike’s firmware is up to date. Check for updates and follow the instructions provided to download and install any available updates.
Calibrate Your Wattbike
Ensure that your Wattbike is properly calibrated by using the manufacturer’s recommended calibration process. Follow the instructions provided by the manufacturer to calibrate your bike, and repeat the process periodically to maintain accuracy.
Contact Support for Help
If none of the above solutions work, contact Zwift or Wattbike support for further assistance. They may be able to provide additional troubleshooting steps or offer a repair or replacement if the issue is with the hardware itself.
Follow these steps above, and you should be able to fix the “Zwift current gear not displayed on Wattbike” error and get back to enjoying your indoor cycling workouts without interruption.